GEFORCE GTX 260 896mb 44bit DDR3 NO DISPLAY

Toggle sidebar Toggle sidebar
U

UniverseGAMING

Commendable
Aug 15, 2016
6
0
1,510
Hello, I bought a GTX 260 yesterday and I installed it into my CPU

MY CPU SPEC:
Mobo: P5G41C-M LX
RAM: 4gb DDR2 (Kingston)
PSU: PowerLogic 800-w
1 year old CMOS Battery
New Cables: 6pin, SATA and etc...

GPU FAN is okay, I plug in my 2 6pin and plug in the VGA to onboard there's no display but when I plug in my 1 6pin and plug in the VGA to onboard there is a display. This is confusing but I want to run my GPU properly please help me Thank you.
 
Solution
popatim
Do not install the GPu yet.
Make sure the clear cmos jumper is in the normal position (1-2 I beleive) and then using the built in video card see if you can enter the bios.
If you can't then you have other issues to resolve first.

Once in the bios set the GPU to initialize first to PEG. This setting is found in the chipset section.
Save the setting and power down. remove the ac wall plug and install your GPU.
Connect the Dispaly to the new GPU, plug power back in and see if it will boot back up.
Sort by date Sort by votes
popatim

popatim

Titan
Moderator
Dec 2, 2009
38,904
980
135,890
Do not install the GPu yet.
Make sure the clear cmos jumper is in the normal position (1-2 I beleive) and then using the built in video card see if you can enter the bios.
If you can't then you have other issues to resolve first.

Once in the bios set the GPU to initialize first to PEG. This setting is found in the chipset section.
Save the setting and power down. remove the ac wall plug and install your GPU.
Connect the Dispaly to the new GPU, plug power back in and see if it will boot back up.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom