Disk boot failure insert system disk press enter

Toggle sidebar Toggle sidebar
H

Hamim_

Commendable
Aug 17, 2016
5
0
1,510
When I start my PC it shows boot failure insert system disk press enter. This problem is happening after I install extra 2 GB ram & graphics card.
 
Solution
LilDog1291


This is likely the case but jsmithepa is also smart in suggesting that you go back to the original configuration and try booting then. That way you can rule out that none of your parts are causing the issue.

I haven't gotten the error you are getting when installing RAM before since usually RAM only causes issues if it is different clock speeds, brands, etc, but this was on older machines that I would work on at work. Not sure if modern RAM has this problem but I also haven't tried putting different clocked sticks in a modern computer before.
Sort by date Sort by votes
LilDog1291

LilDog1291

Honorable
Jan 9, 2013
313
0
10,960


This is likely the case but jsmithepa is also smart in suggesting that you go back to the original configuration and try booting then. That way you can rule out that none of your parts are causing the issue.

I haven't gotten the error you are getting when installing RAM before since usually RAM only causes issues if it is different clock speeds, brands, etc, but this was on older machines that I would work on at work. Not sure if modern RAM has this problem but I also haven't tried putting different clocked sticks in a modern computer before.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom