Just got some new RAM, new CPU for my girlfriend's computer, and used an 'old' Asrock 970 Extreme4 motherboard because hers died. Put everything together, booted right up, downloaded drivers on my computer, USBd them to hers, installed and the internet won't work.
The ethernet drivers allowed the PC to 'see' that I was connected to the network, but I still don't have internet access.
I've flushed the DNS, reset the ip with a command prompt and ipconfig /release/renew.
I tried 1) type on the CMD window: "netsh winsock reset catalog" and press enter.
2) after done, type: "netsh int ip reset reset.log" and press enter.
Booted in safe mode w/ networking, w/out, neither worked.
Any suggestions?
The ethernet drivers allowed the PC to 'see' that I was connected to the network, but I still don't have internet access.
I've flushed the DNS, reset the ip with a command prompt and ipconfig /release/renew.
I tried 1) type on the CMD window: "netsh winsock reset catalog" and press enter.
2) after done, type: "netsh int ip reset reset.log" and press enter.
Booted in safe mode w/ networking, w/out, neither worked.
Any suggestions?
Facebook
Twitter
Instagram