Logitech G500 (wired) disconnecting and reconnecting almost instantly.

Status
Not open for further replies.

Andy Campbell

Commendable
Aug 19, 2016
1
0
1,510
Does anyone know why this occurs?
I'm running Windows 10 and i have the up to date logitech drivers etc. This only started a few days ago... it's boggling my mind!

Here are some logs within 15 seconds of each other (In order)

Device HID\VID_046D&PID_C068&MI_00\8&7477D6F&0&0000 was deleted.

Device HID\VID_046D&PID_C068&MI_00\8&7477d6f&0&0000 requires further installation.

Driver Management has concluded the process to add Service LGSHidFilt for Device Instance ID HID\VID_046D&PID_C068&MI_00\8&7477D6F&0&0000 with the following status: 0.

Driver Management has concluded the process to add Service mouhid for Device Instance ID HID\VID_046D&PID_C068&MI_00\8&7477D6F&0&0000 with the following status: 0.

Driver Management has concluded the process to add Service mouclass for Device Instance ID HID\VID_046D&PID_C068&MI_00\8&7477D6F&0&0000 with the following status: 0.

Driver Management concluded the process to install driver lgsfmouhid.inf_amd64_7704a84ec2ea5556\lgsfmouhid.inf for Device Instance ID HID\VID_046D&PID_C068&MI_00\8&7477D6F&0&0000 with the following status: 0x0.



I can't tell if it's a software problem or if it's a hardware problem. I'm kinda hoping it's hardware related so i can fix it in 10-15 mins at this point.
 
Solution
Try using a different USB port (not connector, actual port, i.e. use front if currently using back, or check to make sure the port ID in the driver is different). If the issue continues, your mouse is likely the issue. If not, you might have failing USB ports
Try using a different USB port (not connector, actual port, i.e. use front if currently using back, or check to make sure the port ID in the driver is different). If the issue continues, your mouse is likely the issue. If not, you might have failing USB ports
 
Solution
Status
Not open for further replies.