- Aug 23, 2016
- 4
- 0
- 1,510
how to connect intesis home device to dell edge gateway
- Thread starter Thangarasu
- Start date
Solution
- Oct 11, 2014
- 34,883
- 3,323
- 146,290
You may be able to connect through wifi.
However answering your question really requires knowing more about the overall network etc. that you currently have in place.
The starting point is the Intesis User Manual.
Here:
https://www.intesishome.com/docs/User-Manual-IntesisHome.pdf
You first need to determine or otherwise that you have/meet the requirements as listed on page 4.
Then you need to read through, understand, and plan out the connectivity needed for your setup.
See what you can figure out and do. Perhaps narrow things down to a specific question or two. Thanks.
However answering your question really requires knowing more about the overall network etc. that you currently have in place.
The starting point is the Intesis User Manual.
Here:
https://www.intesishome.com/docs/User-Manual-IntesisHome.pdf
You first need to determine or otherwise that you have/meet the requirements as listed on page 4.
Then you need to read through, understand, and plan out the connectivity needed for your setup.
See what you can figure out and do. Perhaps narrow things down to a specific question or two. Thanks.
- Aug 23, 2016
- 4
- 0
- 1,510
We can connect the IntesisHome and Dell Edge GateWay in wifi, but i want to transmit the data from IntesisHome device to Dell Edge GateWay.
- Oct 11, 2014
- 34,883
- 3,323
- 146,290
Do not believe that transmitting data can be done directly. Use of Intesis devices require a browser per Section 3, page 4 of the User Manual.
Or you would need some third party software which is unlikely as the IntesisHome product seems very proprietary.
And, as I understand the User Manual you need to set up an account via IntesisHome and register your device.
Please see page 14 of the User Manual.
And if the device was previously owned then the previous owner must request that the device code be removed from his account (page 12).
Or you would need some third party software which is unlikely as the IntesisHome product seems very proprietary.
And, as I understand the User Manual you need to set up an account via IntesisHome and register your device.
Please see page 14 of the User Manual.
And if the device was previously owned then the previous owner must request that the device code be removed from his account (page 12).
- Aug 23, 2016
- 4
- 0
- 1,510
Thank you sir,
Currently we are controlling the IntesisHome device by mobile App, if i have 10 IntesisHome device i wish to configure these 10 devices in DellEdge gateway, now i will control the DellEdge gateway in one Mobile App, here indirectly i am controlling the IntesisHome but i added one more interface(DellEdge gateway) this is my requirement. for this IntesisHome device have to transmit the data(captured informations from the AC) to DellEdge gateway right. finally my question is how IntesisHome device will transmit the data to DellEdge gateway.
Currently we are controlling the IntesisHome device by mobile App, if i have 10 IntesisHome device i wish to configure these 10 devices in DellEdge gateway, now i will control the DellEdge gateway in one Mobile App, here indirectly i am controlling the IntesisHome but i added one more interface(DellEdge gateway) this is my requirement. for this IntesisHome device have to transmit the data(captured informations from the AC) to DellEdge gateway right. finally my question is how IntesisHome device will transmit the data to DellEdge gateway.
- Oct 11, 2014
- 34,883
- 3,323
- 146,290
If I am following your plan correctly - all 10 IntesisHome devices will be (are to be) controlled by the DellEdge gateway instead of the mobile application device. To do that you would need to set up all of the devices via the browser on the DellEdge Gateway per the User Manual.
Then you wish to control the DellEdge gateway via the mobile app device - do I understand correctly?
What you will need to set up is a remote desktop connection from the device with the mobile app so that device can access the DellEdge gateway as if you were sitting at the DellEdge gateway.
For that you will need something like this:
https://get.gotomypc.com/mobile-apps
If you google (as I did) the following words "remote desktop mobile app" you will find other links, application choices, and even video demonstrations.
Such as this video: https://www.youtube.com/watch?v=Wi4-HdUih-o
Then you wish to control the DellEdge gateway via the mobile app device - do I understand correctly?
What you will need to set up is a remote desktop connection from the device with the mobile app so that device can access the DellEdge gateway as if you were sitting at the DellEdge gateway.
For that you will need something like this:
https://get.gotomypc.com/mobile-apps
If you google (as I did) the following words "remote desktop mobile app" you will find other links, application choices, and even video demonstrations.
Such as this video: https://www.youtube.com/watch?v=Wi4-HdUih-o
TRENDING THREADS
-
[SOLVED] Is it safe to use a recapped PSU for a long time ?- Started by zwtch_17
- Replies: 5
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 19
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 7
-
Facebook
Twitter
Instagram