Hard drive problem

Toggle sidebar Toggle sidebar
MeepsterNotchy

MeepsterNotchy

Respectable
Mar 31, 2016
256
0
1,810
I have a hard drive I wanted to use as a drive for storage, and in Disk Management it says "Could not initialize drive an I/O error occurred." It is an IDE/PATA drive and I had it connected via USB adapter (that has worked before). The Disk Management does recognize the drive capacity and model.
 
Solution
SuperSoph_WD
Hey there, @MeepsterNotchy!

I'd recommend you run some HDD diagnostic tests on the drive first, since you are able to see it in Disk Management. Unfortunately, the I/O error might be indicating internal hardware failure, so I hope you don't have any important data stored on that PATA drive.
You could also try connecting the HDD with the USB adapter to another computer to see how it will get detected there as well. I'd also suggest you go to Device Manager and check how the HDD is seen there as well.

Keep me posted. Hope this helps.
SuperSoph_WD
Sort by date Sort by votes
SuperSoph_WD

SuperSoph_WD

Glorious
Jul 30, 2014
6,758
3
45,960
Hey there, @MeepsterNotchy!

I'd recommend you run some HDD diagnostic tests on the drive first, since you are able to see it in Disk Management. Unfortunately, the I/O error might be indicating internal hardware failure, so I hope you don't have any important data stored on that PATA drive.
You could also try connecting the HDD with the USB adapter to another computer to see how it will get detected there as well. I'd also suggest you go to Device Manager and check how the HDD is seen there as well.

Keep me posted. Hope this helps.
SuperSoph_WD
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom