Memory Initialization error with asus x99-a usb 3.1 motherboard and 2x8gb hyperx fury 2666mhz ddr4 ram

Julian_22 · Aug 26, 2016

I keep getting the error code 53 (memory Initialization error) with my new asus motherboard. I also get no display output so i cant get in the bios.
Hope somebody can help me out here

MeanMachine41 · Aug 26, 2016

Julian_22 :

Is your MB the X99-E WS/USB 3.1. ?
If so I would check if the MB fully supports your DIMMs and have been tested.
Memory modules with frequency higher than 2133 MHz and its corresponding timing or the loaded XMP Profile is not the JEDEC memory standard. The stability and compatibility of higher frequency modules depends on the strength of the CPU’s IMC.

I could not find a kit of 2666MHz Hyperx fury DIMMs on the MB QVL so they may or may not work.

Try with just one DIMM in first slot and try switching them around. Also make sure they are seated correctly and pushed home. Clear CMOS and give it a try.
If consistently failing and DIMMs are correct then you will have to inspect CPU socket for bent pins.

Julian_22 · Aug 26, 2016

MeanMachine41 :

Julian_22 :

Is your MB the X99-E WS/USB 3.1. ?
If so I would check if the MB fully supports your DIMMs and have been tested.
Memory modules with frequency higher than 2133 MHz and its corresponding timing or the loaded XMP Profile is not the JEDEC memory standard. The stability and compatibility of higher frequency modules depends on the strength of the CPU’s IMC.

I could not find a kit of 2666MHz Hyperx fury DIMMs on the MB QVL so they may or may not work.

Try with just one DIMM in first slot and try switching them around. Also make sure they are seated correctly and pushed home. Clear CMOS and give it a try.
If consistently failing and DIMMs are correct then you will have to inspect CPU socket for bent pins.

MeanMachine41 · Aug 26, 2016

Sorry Julian, I see your MB is ASUS x99-a usb 3.1 however same applies.
I could not find your modules listed on the QVL for the MB either.
Only ones listed that have been tested are HX426C13PB2K4/16.

Search

Memory Initialization error with asus x99-a usb 3.1 motherboard and 2x8gb hyperx fury 2666mhz ddr4 ram

Julian_22

Commendable

MeanMachine41

MeanMachine41

Judicious

Julian_22

Commendable

MeanMachine41

Judicious

TRENDING THREADS

Latest posts

Moderators online

Share this page