Have Giga Hz ISP but computer ethernet (1GHz card) only picks up 90 MHz

Padmaja_1

Commendable
Aug 27, 2016
4
0
1,510
Hello,
I recently got ATT GHz network. I have a msi computer with 16GB ram, I7 and ehternet card "killer e2200 Gigabit ethernet controller (NDIS 6.30) and Killer wireless n/a/ac 1525 wireless network adapter" , recenlty updated to window 10 previously running on windows 8. So here is the issue, with 1 giga bit isp, i am picking 80 mega bits (mbs) on ethernet (wired on cat 5e cable) and picking up 140mbs on wireless. my apple pro picks 600 mega bits on wireless (cant test wired for the mac does not have a ethernet port). Hope someone here can help figuring out what wrong. Thank you in advance.
 

Padmaja_1

Commendable
Aug 27, 2016
4
0
1,510
Well this is what i figured out that you have to go to control panel, network and sharing center, change adapter setting right click on Ethernet- click properties and uncheck "qualcom atheros bandwitdth control" and then say ok and follow the same step for wireless and reboot your computer, this has helped, but still having issues with high speed upload and I have to remove the Ethernet line and put back in to get the speed and after a few times it goes down and my wireless is still not picking up the speed it only goes to 130mbs. I am lost of options here.
 

Padmaja_1

Commendable
Aug 27, 2016
4
0
1,510
More update which helped improve the upload speed on ethernet: Go to Start->Control Panel->Device Manager->Network adapters->Your adapters name (mine is killer e2200 Gigabit ethernet controller (NDIS 6.30), right-click then select Properties. On the Advance tab, find property Large Send Offload (IPv4) and change its value to Disabled then click OK.
If you have a Large Send Offload (IPv4) v2 try setting that to disable and if you have large send offload v2 IPv6 enable that. if you dont have that than choose IPv4. I still am having issues with wireless not able to match up the gbs speed