What is my computer's major malfunction?
i7 6800k
asus rog rampage 5 edition 10
Here is a 10 min prime 95 test..
Why is core 5 sensor movement at 9? is that good or bad? (dont know why it doesnt show core 6 either..
also everytime i go to over clock be it manually or from the built in motherboard over clock it either fails to start up or it resets after a few mins on the desktop... the on-board overclock which is suppose to be good sets the multiplier to 44 in all cores and voltage to 1.300 with a +/- of 0.7 depending on system demand.
my manual overclock is x40 all cores with 1.3v and the same 0.7 +/- on system demand.
the first one through the system gets to start but crashes before my cores even get to 30 degrees, and the one I put in doesn't work at all wont boot up just stays on the press "del" for bios.
in both circumstances I reset the bios to both the multiplier to auto mode (x37) and the overclock to auto mode instead of manual and the system is stable and you see the results below.
looking at the results my cpu has about 40 degrees to go and should easily hit the built in 4.4Ghz but it fails miserably.
What is my major malfunction or the cpu or the MB's? if I cant overclock then I'm gonna put both cpu and MB in for a refund and get 1151 LGA...
CPU_prime95
i7 6800k
asus rog rampage 5 edition 10
Here is a 10 min prime 95 test..
Why is core 5 sensor movement at 9? is that good or bad? (dont know why it doesnt show core 6 either..
also everytime i go to over clock be it manually or from the built in motherboard over clock it either fails to start up or it resets after a few mins on the desktop... the on-board overclock which is suppose to be good sets the multiplier to 44 in all cores and voltage to 1.300 with a +/- of 0.7 depending on system demand.
my manual overclock is x40 all cores with 1.3v and the same 0.7 +/- on system demand.
the first one through the system gets to start but crashes before my cores even get to 30 degrees, and the one I put in doesn't work at all wont boot up just stays on the press "del" for bios.
in both circumstances I reset the bios to both the multiplier to auto mode (x37) and the overclock to auto mode instead of manual and the system is stable and you see the results below.
looking at the results my cpu has about 40 degrees to go and should easily hit the built in 4.4Ghz but it fails miserably.
What is my major malfunction or the cpu or the MB's? if I cant overclock then I'm gonna put both cpu and MB in for a refund and get 1151 LGA...
CPU_prime95