No post, no beep, no bios, no fans

HP_1998 · Aug 28, 2016

I just built a new pc for the first time. It has
i5 6600k
asus b150 pro gaming
ripjaws 2133 DDR4 2 X 8GB
cooler master evo 212
zotac 1060 amp! 6GB
hyperx Fury 120GB SSD
seagate 7200 rpm 2tb HDD
evga 500W 80+ Bronze

I turn on the power switch on the psu and the motherboard lits up. Fair enough
I hit the power button (all the wiring for the case to the mb for LED, reset, and power are tripled checked) and the cpu fan moves .5 cm (within .1 s) and stops.
No case fans are on. (They are molex so I diary chained them) and then plugged the fan controll wire into the fan head in the mb. The 1060 fans do no spin. I was wonder if this means my motherboard is defective or if my psu is.
Any help would be great.

-Ryan · Aug 28, 2016

Make sure you have plugged the corrected PSU ports on the motherboard. check something like a video card if it has PCI-E cable connected. And make sure you have fully plugged the 24 Pin motherboard power supply cable. Then, turn it on again and see what happens.

Paul NZ · Aug 28, 2016

Look at the sticker on the mobo. One of them will have 4 numbers at the end on it.

And what mobo is it?? The b150 Pro Gaming, Gaming D3, or the Aura?

If it has onboard video remove the videocard you installed. See if it does something

HP_1998 · Aug 30, 2016

-Ryan :

The 24 pin connector is in (its 20 +4). The video card takes only 6 pin( so i used the 6 +2 pin connector, using only the 6 pin section.)
Everything seems to be fine I will try to rewire it within a 1-2 days.

HP_1998 · Aug 30, 2016

Paul NZ :

It is the asus b150 pro gaming.

Im not sure if that card has onboard video and I'm sure where to check. I will try to boot it without the graphics in.

Paul NZ · Aug 30, 2016

Theyre on the back. Looks like it's got HDMI and maybe something else

-Ryan · Aug 30, 2016

HP_1998 :

make sure you plug the 20 + 4 pin fully in, and you don't see any gap between.

HP_1998 · Aug 30, 2016

Paul NZ :

So if there is onboard graphics I have to use that?
But then how will the video card be utilized?

Paul NZ · Aug 30, 2016

It's to see if the card you installed is working or dead

HP_1998 · Sep 1, 2016

guys i built the pc out the case and i slowly built up using the "no post" thread and i am getting 1 long beep and 2 short beeps
Thats a video error. I tried outputing through the motherboard itself and then installed the graphics card and booted.
In both situation i still get 1 long beep and 2 short beeps. What is the problem?

edit:Im getting the 1 long 2 short if i remove the ram too.
edit2: Should I get new ram? I check the motherboard manual and its not on the recommended list.

Paul NZ · Sep 1, 2016

Remove the cpu and see if there are any bent pins

HP_1998 · Sep 4, 2016

It seem that I did not press hard enough on my ram lol.
Also it seems I daisy chained too many fan together and that fan header overloaded my motherboard.
It's all good now thanks guys. :^)

-Ryan · Sep 5, 2016

HP_1998 :

common mistakes for the first time build

Search

No post, no beep, no bios, no fans

HP_1998

Commendable

-Ryan

Commendable

Paul NZ

Polypheme

HP_1998

Commendable

HP_1998

Commendable

Paul NZ

Polypheme

-Ryan

Commendable

HP_1998

Commendable

Paul NZ

Polypheme

HP_1998

Commendable

Paul NZ

Polypheme

HP_1998

Commendable

-Ryan

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page