mixed wired and wifi network with router after a switch

Teyeb_H

Commendable
Aug 29, 2016
2
0
1,510
Hello
On one side of my network there I’ve two time attendance machines linked to a non managed switch which is linked to a wifi router, on the other side about 30 meters away another wifi router setup as wireless client linked to the main PC running the time attendance application

I’m having issues with the terminals , the main PC most of time could see only one terminal

 
Solution


Quite literally exactly what that graph says

Connect (WAN) to (ROUTER+WiFi Access Point), and (SWITCH) to (ROUTER+WiFi Access Point). Then connect (TERMINAL 1) and (TERMINAL 2) to (SWITCH). After making sure your second router has a reverse access point capability, connect the (BASE STATION) to the (WiFi Access Point) by using your standard wifi login. From there, connect (TERMINAL 3) to the (BASE STATION).

As long as all terminals are on the same subnet, the router should take care of everything. Make sure the (BASE...

Teyeb_H

Commendable
Aug 29, 2016
2
0
1,510

Could you please apply that on my case more detailed

 


Quite literally exactly what that graph says

Connect (WAN) to (ROUTER+WiFi Access Point), and (SWITCH) to (ROUTER+WiFi Access Point). Then connect (TERMINAL 1) and (TERMINAL 2) to (SWITCH). After making sure your second router has a reverse access point capability, connect the (BASE STATION) to the (WiFi Access Point) by using your standard wifi login. From there, connect (TERMINAL 3) to the (BASE STATION).

As long as all terminals are on the same subnet, the router should take care of everything. Make sure the (BASE STATION) is not set to be a router and all computers are on the same workgroup/homegroup or else you'll have issues sharing files.
 
Solution