ASUS z170-A not responding to case power button

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
C

catiastyx

Commendable
Aug 29, 2016
4
0
1,510
Hi,

I just recently built my first PC and I'm having issues getting it to turn on.

Motherboard: ASUS Z170-A
Power supply: Rosewill Hive 750W
Case: DIYPC Zondda

I have everything connected to the motherboard and the power LED (+), (-), and PWR SW cables are all connected in the bottom right hand corner. When I turn the power supply on the PWR_LED light comes on, however there is no response from the button on the case being pushed. I'm not sure if it's an issue with the case or something with the power supply or motherboard. I would appreciate any insight as to what my issue might be.
 
Solution
smorizio
try the mb outside the case with one ram stick and onboard video if it posts fine with the power supply check the bios rev. if it old use a usb stick and update it.
Sort by date Sort by votes
C

catiastyx

Commendable
Aug 29, 2016
4
0
1,510
CPU is an LGA 1151
All the pins for the power supply are connected, however the power supply I bought came with the 24 pin and 2 of the 8 pin, but I'm not sure if that makes a difference. I've tried switching the different 8 pin cables with no change.
 
Upvote 0 Downvote
J

Jdr227

Commendable
Jan 15, 2017
1
0
1,510
Did you ever figure this out? I'm having the same issue with this motherboard. It will start if I press the power button on the motherboard, but the power button on the case does nothing. I've shorted the pins.. Nothing! So the only way to start it, is pull off the cover and pwr_sw button on the motherboard.
 
Upvote 0 Downvote
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom