Hello, this is my frist post so sorry if it's at the wrong place.
components:
CPU: Intel i5 6600k
CPU cooler: Coolermaster 212 evo
Ram: 16gb ballistic sport
GPU: INNO3D gtx 1070 x3
MOBO: ASrock z170 extreme 3
PSU: Corsair RM550X
SSD: samsung 850 evo
HDD: WD Black
I build my pc yesterday installed windows and installed a UEFI update on it and went to bed. The next morning wanted to turn the system on but it failed. After I turned the PSU itself on and off it started to boot but it took a long time with the ASRock logo on the monitor. After about a minute the option to go to the bios and to "continue" appeared. I chose continue but after that it was a black screen for 30-40 sec and my system turned itself off. I tried to turn it on but it only worked after i turned the powerswitch on the PSU. So my system booted as slow as last time but this time i chose the BIOS option. and saw nothing strange happening there. I quitted the bios and th same thing happened , black screen for 30 second and it turned off. So i removed the CMOS battery and tried everything again. I decided to install windows again. I installed windows with the safe problems when it needed to restart but i got it installed. I installed some drivers in windows itself but to install them you needed to restart. My pc didnt restart itself and i needed to turn off the power switch on the psu again. After that i didnt get into widnows so i opened my system to see if i saw anything wrong with it. at that moment I saw that my 2x4 CPU connector wasnt connected to the psu. I connected it and the system turned on and i got into windows. After 5 minutes windows gave a black screen but the fans and the ligt on my gpu kept on going. I decided to wait 5-10 minutes to see if something was happening but nothing happened so i turned off the pc and tried to turn it on but again it would only work when i turned my psu on and off. And now i'am here because I dont know what to try anymore.
Please, any help and suggestions is very welcome.
components:
CPU: Intel i5 6600k
CPU cooler: Coolermaster 212 evo
Ram: 16gb ballistic sport
GPU: INNO3D gtx 1070 x3
MOBO: ASrock z170 extreme 3
PSU: Corsair RM550X
SSD: samsung 850 evo
HDD: WD Black
I build my pc yesterday installed windows and installed a UEFI update on it and went to bed. The next morning wanted to turn the system on but it failed. After I turned the PSU itself on and off it started to boot but it took a long time with the ASRock logo on the monitor. After about a minute the option to go to the bios and to "continue" appeared. I chose continue but after that it was a black screen for 30-40 sec and my system turned itself off. I tried to turn it on but it only worked after i turned the powerswitch on the PSU. So my system booted as slow as last time but this time i chose the BIOS option. and saw nothing strange happening there. I quitted the bios and th same thing happened , black screen for 30 second and it turned off. So i removed the CMOS battery and tried everything again. I decided to install windows again. I installed windows with the safe problems when it needed to restart but i got it installed. I installed some drivers in windows itself but to install them you needed to restart. My pc didnt restart itself and i needed to turn off the power switch on the psu again. After that i didnt get into widnows so i opened my system to see if i saw anything wrong with it. at that moment I saw that my 2x4 CPU connector wasnt connected to the psu. I connected it and the system turned on and i got into windows. After 5 minutes windows gave a black screen but the fans and the ligt on my gpu kept on going. I decided to wait 5-10 minutes to see if something was happening but nothing happened so i turned off the pc and tried to turn it on but again it would only work when i turned my psu on and off. And now i'am here because I dont know what to try anymore.
Please, any help and suggestions is very welcome.