no signal to display

Toggle sidebar Toggle sidebar
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510
Hi built my first pc. I have added graphics cards, cpus & coolers before.

Build
Asus 970 pro gaming / Aura motherboard
8gb ram balistik
Amd fx 8350 Cpu
Gtx 980 ti msi
Corsair 650 FX PSU
Case nzxt guardian 921
Normal 1000gb hard driver.

The computer starts and stays running fine no bips from the motherboard though. And either VGA/HDMI or DVI gives a signal.

My other case that the Cpu, hard driver came from. Died after I was away working. The computer was running fine before I left. When I came home I seen it being turned off. So I hit the power button and I saw one off the leds flash. So I bought a new PSU corsair 650 FX. Or AX" I don't remember. Anyways added it and it was still dead. So I decided to remove everything from it after I removed the Cpu I sprung in to life and 10 sec later one off the circuits catch on fire. So, I added back the Cpu and sundly the computer was running again. But I bought a new case , gtx 980 Ti msi and a asus 970 pro gaming / Aura motherboard. And once again it starts but doesn't find a signal everything should be the right way plugged in.
PS front led for the temp died after I try'd 30 times to get it to work. Everything should be working nothing should be defekt.

Typed everything on a mobile phone so let's not have a grammar police!
 
Solution
hang-the-9
Sort by date Sort by votes
hang-the-9

hang-the-9

Titan
Mar 25, 2010
60,387
1,081
152,940
Ah.. "So I decided to remove everything from it after I removed the Cpu I sprung in to life and 10 sec later one off the circuits catch on fire".
What exactly was on fire? Bit tough to know what is going on since you changes so many things, but first clue is that computer parts that catch fire tend not to work.

What is new and what is old? And explain a bit about the fire thing.
 
Upvote 1 Downvote
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510


Yeah sorry typing on a phone. Okey so when I changed PSU it would still not start so I started to remove everything. Then I try'd with 1 ram stick and the Cpu. Still nothing so removed both and graphics card. Then it did start and run fine but 10 sec later one off the circuits catched fire. And after that happend I hit the bak turn off button on the PSU. And added back the Cpu and 1 ram. And the pc started fine again. I did not have the monitor plugged in at the time. So I ordered a new motherboard and upgraded the Gpu to a gtx 980 Ti msi and a case nzxt guardian 921. instead off a msi 760. And now the pc starts but I don't get a signal.
 
Upvote 0 Downvote
hang-the-9

hang-the-9

Titan
Mar 25, 2010
60,387
1,081
152,940


What caught fire? You replaced that part right? So you have a new motherboard and video card, same PSU as when the thing caught fire (and need to know what, there are many "circuits" in a computer).
 
Upvote 0 Downvote
Solution
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510
Yeah the part that caught fire was the motherboard old one circuits name was D20 on a gigabyte motherboard. And the PSU is brand new. Sorry hard to look back at what I'm typing. So missing a few sentences. Thought I said I bought a new PSU to try with. But didn't help same thing old motherboard. New one works fine aa starting go but doesn't find my monitor. PS no vga /dvi/hdmi on the motherboard it self. Only on the graphic card!
 
Upvote 0 Downvote
hang-the-9

hang-the-9

Titan
Mar 25, 2010
60,387
1,081
152,940


You replaced everything else in the system really aside from the CPU, so that may be it. Of you have something not connected properly, maybe a bent pin in the CPU.
 
Upvote 0 Downvote
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510
Hi switched out the Cpu and just found out I got a red cpu_led error and I will get a x2 8gb furyX ram on Monday. Next is sending back the mobo. Literally everything is swapped out now too. Start to get pretty pissed now.
 
Upvote 0 Downvote
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510
Ps, cpu red light was on before I swapped cpu. My guess is a dead mobo. So if the ram is not working with it. I will send it back. And using atm default fan for the Cpu. Pretty sure the mobo is dead. Just because it doesn't post.
 
Upvote 0 Downvote
R

roadman1994

Reputable
Sep 27, 2015
20
0
4,510
hi so got the Mobo back 2 weeks ago everything was fine with, my CPU was acutally dead. so i sent that back and waiting for a new one to arive as i had warenty left ! thanks for all the help dudes !
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom