Hi everyone, I ordered online for my newly built PC(LGA 1151), I tried to start my computer it has no LED lights on my chassis, fan not spinning neither, but GPU has LED though.
So I tried my old motherboard (LGA 775) it starts up, chassis have LED everything working fine.. so I tried breadboard on my new board with only 8 pins 12v and 20+4 pin connected and CPU fans too, tried it and still couldn't boot up, fan isn't spinning
In the end I tried short method by using screw driver, the system still couldn't start up.. even tried clear CMOS pin and even remove CMOS battery still didn't work..
So I lead to two problem, either my 500w PSU doesn't provide enough juice or maybe the new board power switch problem.. any help would be appreciated .. thanks
Build :
i3 6100
Gigabyte B150M DS3H DDR4
ADATA 8GB DDR4 2133MHZ
ACBEL 510W PSU
Edit : I just heard about " haswell PSU " does it affect if I'm using an old but workable PSU like that acbel one's on skylake motherboard ? Do I need haswell PSU compatibility ? If yes, what do you guys would recommended? Thanks
So I tried my old motherboard (LGA 775) it starts up, chassis have LED everything working fine.. so I tried breadboard on my new board with only 8 pins 12v and 20+4 pin connected and CPU fans too, tried it and still couldn't boot up, fan isn't spinning
In the end I tried short method by using screw driver, the system still couldn't start up.. even tried clear CMOS pin and even remove CMOS battery still didn't work..
So I lead to two problem, either my 500w PSU doesn't provide enough juice or maybe the new board power switch problem.. any help would be appreciated .. thanks
Build :
i3 6100
Gigabyte B150M DS3H DDR4
ADATA 8GB DDR4 2133MHZ
ACBEL 510W PSU
Edit : I just heard about " haswell PSU " does it affect if I'm using an old but workable PSU like that acbel one's on skylake motherboard ? Do I need haswell PSU compatibility ? If yes, what do you guys would recommended? Thanks