Hi All,
I know this is probably asked incredibly often, but I'm having trouble setting up my WoL. Let me give you an overview of what has been done sofar:
OS: Windows 10
Motherboard: MSI 970A-G43
NIC: Onboard NiC
- Device Manager > Network adaptors > RealTek PCIe GBE Family Controller > Properties > Driver
Driver Version: 10.10.714.2016
- Device Manager > Network adaptors > RealTek PCIe GBE Family Controller > Properties > Power Management
"Allow the computer to turn off the device to save power", "Allow the device to wake the computer" & "Only allow a magic packet to wake the computer" all ticked.
- BIOS
Deactive EuP 2013 Option
Activate Resume by PCI & PCIe Device
I have confirmed that the magic packet is being received using a monitor (http://www.depicus.com/wake-on-lan/wake-on-lan-monitor.aspx) but the system doesn't seem to turn on using a Wake Up Command.
Any ideas what else to check?
Thanks for your time,
Rich
I know this is probably asked incredibly often, but I'm having trouble setting up my WoL. Let me give you an overview of what has been done sofar:
OS: Windows 10
Motherboard: MSI 970A-G43
NIC: Onboard NiC
- Device Manager > Network adaptors > RealTek PCIe GBE Family Controller > Properties > Driver
Driver Version: 10.10.714.2016
- Device Manager > Network adaptors > RealTek PCIe GBE Family Controller > Properties > Power Management
"Allow the computer to turn off the device to save power", "Allow the device to wake the computer" & "Only allow a magic packet to wake the computer" all ticked.
- BIOS
Deactive EuP 2013 Option
Activate Resume by PCI & PCIe Device
I have confirmed that the magic packet is being received using a monitor (http://www.depicus.com/wake-on-lan/wake-on-lan-monitor.aspx) but the system doesn't seem to turn on using a Wake Up Command.
Any ideas what else to check?
Thanks for your time,
Rich