No physical memory is available at the location required for the Windows Boot Manager. The system can not continue

Upul_1

Commendable
Sep 8, 2016
1
0
1,510
Hey Everyone, I have hp 6305 small form factor. when i go upgrade the hard disk capacity with new one and tried to boot from windows 7 dvd, then I encountered above error message. I did my best but could not start the new installation.

please help to solve this issue.

Thanks,
Upul_1
 
Solution
Hey there, Upul_1.

This could be a tough issue to troubleshoot. So start with checking if everything has been properly connected (make sure that you haven't dislodged a memory module by accident as well). Try resetting or updating your BIOS (some users have been known to fix the problem with a BIOS update). Try the drive with a different computer to see if the same issue occurs, or at least with different cables and a different SATA port. Try changing the CMOS battery.
It could also be some sort of incompatibility issue and if this is the case you should get in touch with the computer manufacturer to see if the drive is not compatible with the motherboard for some reason (even though it's not very likely).

Hope that helps. Please let...
Hey there, Upul_1.

This could be a tough issue to troubleshoot. So start with checking if everything has been properly connected (make sure that you haven't dislodged a memory module by accident as well). Try resetting or updating your BIOS (some users have been known to fix the problem with a BIOS update). Try the drive with a different computer to see if the same issue occurs, or at least with different cables and a different SATA port. Try changing the CMOS battery.
It could also be some sort of incompatibility issue and if this is the case you should get in touch with the computer manufacturer to see if the drive is not compatible with the motherboard for some reason (even though it's not very likely).

Hope that helps. Please let me know how everything goes.
Boogieman_WD
 
Solution