Logitech G933 Default Audio Device

jalonsolabori

Reputable
Jan 18, 2015
18
0
4,520
Hi..!!

I just bought a Logitech G933 for my son's computer, but when the battery runs out I have to go to control panel and change the default audio device from G933 to my PC speakers.

Is there a way for Windows do it automatically,

We have Windows 10

Thanks in advance,
 
Solution
Hi:

I found this solution in another thread and worked like a dream.

*****
"Assuming windows. Go into sound, make sure both the wireless headset and speakers are enabled. Change to the "recording tab" and you should see a device called "stereo Mix". Go into the properties and change to the "listen" tab. Check the box "listen to this device" and then under "Playback through this device" select the G933 device from the list. Windows will now mix the playback (even though its under "recording"). If the G933 is not in the list, then it is probably disabled and you need to right click and enable it in the playback tb."

Memhorder

Distinguished
I don't think you can do it automatically, it should ...but you can just right click the little speaker in bottom right hand part of screen. Go "playback devices" and choose your speakers, set as default. Instead of control panel
 

jalonsolabori

Reputable
Jan 18, 2015
18
0
4,520
Hi:

I found this solution in another thread and worked like a dream.

*****
"Assuming windows. Go into sound, make sure both the wireless headset and speakers are enabled. Change to the "recording tab" and you should see a device called "stereo Mix". Go into the properties and change to the "listen" tab. Check the box "listen to this device" and then under "Playback through this device" select the G933 device from the list. Windows will now mix the playback (even though its under "recording"). If the G933 is not in the list, then it is probably disabled and you need to right click and enable it in the playback tb."
 
Solution

Sean_126

Prominent
Apr 5, 2017
3
0
510


 

TRENDING THREADS