x99x ASRock Motherboard code 99 & 66

MrJoeSchmo

Commendable
Sep 11, 2016
4
0
1,520
I'm having an annoying problem after a standard restart.

My Dr Debug was giving me an error code of 99 and I was getting stuck on the ASRock splash screen on each boot. I tried clearing the CMOS and going through the setup again.

This gives me the same issue with the only difference being Dr Debug now gives out 66 instead of 99.

Has anyone run into this before? I can't find good information on either of these codes online.

Thanks
 
Solution
Well I'm not sure how this happened, but I'm going to walk though what I did.

I checked the SDD I had my OS on with an external reader to make sure it was functioning (since one of the other possible things I was getting on boot was POST-ing but no OS booting). That was fine so I put it back in and got the same error. So I figured I might as well update the BIOS for the hell of it and give it a CMOS clear again.

As soon as I had set up a USB to do this and rebooted it immediately posted and booted normally. I'm going to watch this for a few days and if all is fine then I'll close the question.

MrJoeSchmo

Commendable
Sep 11, 2016
4
0
1,520
Well I'm not sure how this happened, but I'm going to walk though what I did.

I checked the SDD I had my OS on with an external reader to make sure it was functioning (since one of the other possible things I was getting on boot was POST-ing but no OS booting). That was fine so I put it back in and got the same error. So I figured I might as well update the BIOS for the hell of it and give it a CMOS clear again.

As soon as I had set up a USB to do this and rebooted it immediately posted and booted normally. I'm going to watch this for a few days and if all is fine then I'll close the question.
 
Solution

MrJoeSchmo

Commendable
Sep 11, 2016
4
0
1,520


I didn't end up trying that, but if the problem comes up again I might give that a go. Thanks.
 

Latest posts