- Apr 28, 2016
- 7
- 0
- 1,510
hi everyone , i recently bought a new ram ( avexir core serie 4gb ddr3 1600mhz) and i've placed in my old pc :
biostar g41d3c micro ATX motherboard (two ram slots/ updated bios)
intel dual core e5700 3.0ghz
2x2gb ram ddr3 1033mhz
nvidia gtx 570
as it says in the title i get no display signal whenever i place the new ram alone or with another 2gb ram but when i put back the 2 old rams th pc boots normally.
the ram works perfectly , i've tried it in another pc and it boots like charm , and what i've tried so far is resetting the cmos and even removing the cmos battery but no luck .
when i checked with pcpartpicker.com its says its compatible,
here is the site: http://pcpartpicker.com/list/dCM7RG
so what seems to be the problem ???
ps:i tried a kingston 8gb ddr3 ram 1600mhz and it didnt work as well but i guess its because the mobo cant hold more than 4gb per slot
biostar g41d3c micro ATX motherboard (two ram slots/ updated bios)
intel dual core e5700 3.0ghz
2x2gb ram ddr3 1033mhz
nvidia gtx 570
as it says in the title i get no display signal whenever i place the new ram alone or with another 2gb ram but when i put back the 2 old rams th pc boots normally.
the ram works perfectly , i've tried it in another pc and it boots like charm , and what i've tried so far is resetting the cmos and even removing the cmos battery but no luck .
when i checked with pcpartpicker.com its says its compatible,
here is the site: http://pcpartpicker.com/list/dCM7RG
so what seems to be the problem ???
ps:i tried a kingston 8gb ddr3 ram 1600mhz and it didnt work as well but i guess its because the mobo cant hold more than 4gb per slot
Facebook
Twitter
Instagram