- Mar 17, 2010
- 212
- 2
- 18,695
My setup:
I have the following installed:
My questions:
Here is what my case supports:
- ■Thermaltake Suppressor F51 windowed case
■Cooler Master Hyper 212 EVO CPU cooler
I have the following installed:
■Stock 200mm front case fan (on the lower half)
■Stock 140mm rear case fan
■Stock 120mm CPU cooler fan
My questions:
- ■Should I keep the 1x 200mm front fan, or replace it with 2x 140mm (or 3x 120mm)?
■Is the single fan on the CPU cooler enough? Is it on the correct side? Should it be sucking or blowing? (I'm not sure what it's currently doing)
■Should I mount a second fan on the other side of the cooler? Should this be blowing or sucking?
■Is having 2x 140mm (or 3x 120mm) at the front and one smaller one at the back optimal? According to the case support image below, I can fit lots more in (3 up top, 2x on the bottom)
Here is what my case supports:
Facebook
Twitter
Instagram