- Sep 16, 2016
- 2
- 0
- 1,510
Hi everyone,
we encounter some issues with embedded intel RAID.
Descripition of the problem :
- we put 3 WD Red HDD in the PC
- we create a RAID5 volume on the three disks
- we install Windows Server 2012 R2
- after the first or second reboot of the OS
either the system hang on the RAID summary interface
- some times is pass by this screen and Windows fails loading with BCD error
- some times we need to power reset the system and get an "Error Occured (0)"
or we have one drive having "Error Occured (0)"
Same happens when we try with RAID 1
Mobo: Jetway NF9J-Q87
CPU ; i5 4690
RAM : Corsair 16Gb
Intel ROM version : 12.6.0.1867
Intel RST version : 13.6.0.1002
Edit : no need to wait for windows installation. If we just configure the RAID, reboot few times, it becomes corrupted with a disk either "Error Occured" or "Non RAID disk".
Edit 2 : Everything is fine with WD RE4 1TB / WD Red 1TB. So far the problem is with Red 4TB. We are currently testing Red 2TB
Any advice ?
we encounter some issues with embedded intel RAID.
Descripition of the problem :
- we put 3 WD Red HDD in the PC
- we create a RAID5 volume on the three disks
- we install Windows Server 2012 R2
- after the first or second reboot of the OS
either the system hang on the RAID summary interface
- some times is pass by this screen and Windows fails loading with BCD error
- some times we need to power reset the system and get an "Error Occured (0)"
or we have one drive having "Error Occured (0)"
Same happens when we try with RAID 1
Mobo: Jetway NF9J-Q87
CPU ; i5 4690
RAM : Corsair 16Gb
Intel ROM version : 12.6.0.1867
Intel RST version : 13.6.0.1002
Edit : no need to wait for windows installation. If we just configure the RAID, reboot few times, it becomes corrupted with a disk either "Error Occured" or "Non RAID disk".
Edit 2 : Everything is fine with WD RE4 1TB / WD Red 1TB. So far the problem is with Red 4TB. We are currently testing Red 2TB
Any advice ?
Facebook
Twitter
Instagram