- Sep 16, 2016
- 3
- 0
- 1,510
I'm having trouble with the Asus ROG Aura Software that controls the lighting for my two Asus Strix RX 480's in Crossfire. It controls the graphics card in slot 1 perfectly and as expected. Unfortunately I haven't been able to figure out how to take control and adjust the lighting for the second graphics card in slot 3. The second graphics card's lighting is on and has defaulted to a static red display. I see this as a software issue and perhaps it's just not a feature built in to the software yet, but I'm hoping someone out there knows better than I do. I've checked the Radeon software and Crossfire is on and functioning properly.
System (if it matters):
AMD FX 8370
Asus Crosshair V Formula-Z, MB
Asus Strix RX 480(x2) in CFX
16GB HyperX FURY DDR3 1866MHz RAM
Corsair AX860i PSU
Crucial M550 256GB SSD & MX200 500GB SSD
Windows 10 64bit
I have zero issues with anything else, hardware or software.
Thanks for the help!
edit: The version of the Asus Aura software I'm running is V0.0.4.1, which is the newest as of today. The software version is dated 08/02/2016 on Asus' website.
edit 2: I've emailed Asus Technical Support and will update this thread once I receive a reply from them.
System (if it matters):
AMD FX 8370
Asus Crosshair V Formula-Z, MB
Asus Strix RX 480(x2) in CFX
16GB HyperX FURY DDR3 1866MHz RAM
Corsair AX860i PSU
Crucial M550 256GB SSD & MX200 500GB SSD
Windows 10 64bit
I have zero issues with anything else, hardware or software.
Thanks for the help!
edit: The version of the Asus Aura software I'm running is V0.0.4.1, which is the newest as of today. The software version is dated 08/02/2016 on Asus' website.
edit 2: I've emailed Asus Technical Support and will update this thread once I receive a reply from them.
Facebook
Twitter
Instagram