Hi guys!So I was trying to build my first PC and everything was going really well. Actually I built it! I just wanted to mess with the cables to have a better cable management. Any way I unplugged my USB 3.0 cable from the USB 3.0 port on the motherboard and routed the cable the way I wanted and when I plugged the cable back to the USB 3.0 port on the motherboard I wasn't able to plug it so I pushed it hard but accidentally broke the pins on the USB 3.0 port on the motherboard and some pins were badly bent actually some fell down. Help! Please guys I need some help if there is an adapter that I can use or something else please link it .I actually saw some kind people saying that I can use this adapter Inateck PCI-E to USB 3.0 5-Port PCI Express Card and 15-Pin Power Connector. This is the link https://www.amazon.com/gp/aw/d/B00FPIMJEW/ref=mp_s_a_1_3?ie=UTF8&qid=1474141136&sr=8-3&pi=SY200_QL40&keywords=inateck+20+pin&dpPl=1&dpID=517We2KgceL&ref=plSrch . But Can I use my 3.0 ports on my case?There is 2 USB 3.0 ports on the front of my case and 2 more USB 3.0 ports on the back of the case and there is 2 more USB 2.0 ports on the back too. But I want all my case USB ports to function properly. Even if all USB ports will become 2.0 ports not 3.0. Please guys I need some help.Link me a product if that will fix my problem. Please leave a link and your Email to easily contact each other. PLEASE HELP ME GUYS! Thanks