- Sep 18, 2016
- 5
- 0
- 1,510
Hi, so I decided to upgrade my gpu today, uninstalled my old gpu driver, shut down. Switched to my new graphics card, hooked up the 8 pin power cable and booted.
No problems until I installed the driver from the disk which was included, it asked me to reboot, then BSoD while it was shutting down...
Since then, my pc turns on to a black screen, has a "normal" post beep and then nothing. Sometimes it shows the splash screen, but I cant access any settings [it just clicks].
I've tried booting using the intergrated graphics and it doesnt work either, after many boot loops it will show a blue "gigabyte uefi bios" screen, but its completely blank aside from the title.
Is there anything I can do? This is driving me crazy, especially since it was working before the driver update...
Im assuming its a problem with my motherboard.
If you need any more specific details, thats no problem, ill provide whatever I can.
Specs;
Gigabyte ga z77 d3h
8gn hyperx ram
Coolermaster rs-700-acab-d3 700w psu
Intel i5 2500k
Old gpu: gigabyte gtx650ti boost 2gb
New gpu: asus gtx 970 strix
No problems until I installed the driver from the disk which was included, it asked me to reboot, then BSoD while it was shutting down...
Since then, my pc turns on to a black screen, has a "normal" post beep and then nothing. Sometimes it shows the splash screen, but I cant access any settings [it just clicks].
I've tried booting using the intergrated graphics and it doesnt work either, after many boot loops it will show a blue "gigabyte uefi bios" screen, but its completely blank aside from the title.
Is there anything I can do? This is driving me crazy, especially since it was working before the driver update...
Im assuming its a problem with my motherboard.
If you need any more specific details, thats no problem, ill provide whatever I can.
Specs;
Gigabyte ga z77 d3h
8gn hyperx ram
Coolermaster rs-700-acab-d3 700w psu
Intel i5 2500k
Old gpu: gigabyte gtx650ti boost 2gb
New gpu: asus gtx 970 strix
Facebook
Twitter
Instagram