Newly built PC doesn't boot.

Joelgre

Commendable
Sep 22, 2016
1
0
1,510
Hello people. I wanted to get started in the PC gaming community so I bought some parts to build my first PC.

The parts I bought are:

Motherboard: Gigabyte GA-H110-ma LGA 1151 DDR4.
CPU: Intel Skylake i3 6100 3.70Ghz 3M Cache
RAM: Corsair Vengeance LPX DDR4 2133mhz 2x8gb (16 GB)
PSU: EVGA 700 b1 Bronze Certified
SSD: Kingston UV400

The problem is this one. I built everything and connected every cable where it's supposed to be. The 20+4 Pin connector from the PSU directly into the motherboard. The 4+4 Pin CPU connector, my motherboard has only to connect 4 pins, so I did. CPU Fan is in it's place, same with everything from the case in the fpanel. When I start the PC, everything seems to start normally, but I don't get anything on screen, any beeps, any sounds. I tried connecting the HDD from my old PC and still, it doesn't boot. I tried with my old pc's PSU and it's just the same. I used to troubleshooting guide with no results.

I tried connecting only the CPU and the motherboard and I'm still not getting any beeps, tried connecting each stick of ram into both slots and still. I don't know what else to do, I don't know if my motherboard came DOA or if the CPU came DOA too.

Please help, this is completely frustrating.