you just unplugged a device from the audio jack

JeaMoN

Commendable
Sep 23, 2016
4
0
1,510
Hi Everyone.

I have got this problem after i booted to windows 10.

Whenever i enable High Definition Audio, it goes nuts. I had to remove realtek HD manager. Also windows 10 was sending notifications all the time. Therefore i disabled the High Definition Audio from Device Manager.

For now I can not use my jacks.Although I can get the sound with my monitor(hdmi).

Whenever I enable High definition Audio, or download realted hd manager sound system flickers.

When i open the Playback Devices, Headphones and my monitor flickers all the time. It's crazy. Like flickers 5 times in a sec.

Even though i do not have anything on my jack, still keep saying you just unplugged a device.

Do anyone familiar with this problem?

Thanks
 
Solution
It sounds like a hardware problem with either one of the jacks or the motherboard audio chip. If you could find a loose connection, you might be able to fix it. Otherwise, the best solution is probably what you are already doing: run sound through HDMI and disable your motherboard's audio. You might be able to disable it in the bios so that it won't show up in your devices at all.
It sounds like a hardware problem with either one of the jacks or the motherboard audio chip. If you could find a loose connection, you might be able to fix it. Otherwise, the best solution is probably what you are already doing: run sound through HDMI and disable your motherboard's audio. You might be able to disable it in the bios so that it won't show up in your devices at all.
 
Solution

JeaMoN

Commendable
Sep 23, 2016
4
0
1,510
Well, i have another question.

While my jacks are not working, what happens if i buy a new headset with usb cable. Would it work? ( headset without sound card in it)