My h110m motherboard doesn't boot

Toggle sidebar Toggle sidebar
G

ghostrecon06

Commendable
Sep 27, 2016
1
0
1,510
My h110m motherboard doesn't boot up. It shows the CPU light on to say there's an error but there's no bent pins I checked and my fan works and everything else seems to work.

My specs:
Intel i3 6100 3.7ghz
Hyperx fury 8gb 2133 ram
Amd radeon hd 5850 1gb
500w thermal take psu
160gb western digital hard drive
 
Solution
Mr Davo
Disconnect everything from the board with the exception of the power and RAM, e.g.: disconnect all hard drives, optical drives, etc. Once you have done this try to boot up. If you can't boot remove all RAM sticks (assuming that there is more than one), then insert one stick into the board, and try to start again. If it still doesn't boot up then try moving the RAM stick to a different slot, and so on until you have tried each RAM slot... If after all of your fiddling there is still no action then replace the board (as it is cooked!).
Sort by date Sort by votes
Mr Davo

Mr Davo

Distinguished
Feb 22, 2010
325
0
18,810
Disconnect everything from the board with the exception of the power and RAM, e.g.: disconnect all hard drives, optical drives, etc. Once you have done this try to boot up. If you can't boot remove all RAM sticks (assuming that there is more than one), then insert one stick into the board, and try to start again. If it still doesn't boot up then try moving the RAM stick to a different slot, and so on until you have tried each RAM slot... If after all of your fiddling there is still no action then replace the board (as it is cooked!).
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom