What would be a good price for this never overclocked system (built in Oct. 2012) to sell fast, but fair? Here are my specs.
Computer Type ACPI x64-based PC
Operating System Microsoft Windows 10 Home
PC CASE: Cooler Master HAF-932
Motherboard
CPU Type QuadCore Intel Core i7-3770K, 3900 MHz (39 x 100) CPU Cooler: Corsair H100 Liquid Cooler
Motherboard Name Asus P8Z77-V LE Plus (2 PCI, 2 PCI-E x1, 3 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)
Motherboard Chipset Intel Panther Point Z77, Intel Ivy Bridge
System Memory 32712 MB (DDR3-1333 DDR3 SDRAM)
DIMM1: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM2: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM3: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM4: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
Monitor Model: ASUS VS247H-P
Disk Drive Seagate Barracuda XT 2 TB ST320006 41AS SCSI Disk Device (2 MB, 7200 RPM, SATA-III)
Optical Drive ASUS BW-12B1ST (12x/2x/8x BD-RE)
SMART Hard Disks Status OK
DMI BIOS Version 0910
DMI Motherboard Manufacturer ASUSTeK COMPUTER INC.
DMI Motherboard Product P8Z77-V LE PLUS
Video Adapter: EVGA GeForce GTX 690, PART NUMBER:04G-P4-2690 with ARCTIC COOLER attached to it.
The only wear and tear that is noticeable is a couple of scratches on the PC case due to cutting out center wires on wire shelf, only leaving frame intact (which the cut ends scratched). With this set up I can slide it around PC on the upper half of case for added support in case PC were to get knocked over. And a broken tab on the 1st PCI 3.0 slot on Motherboard that releases the GPU. I still use this slot for my GPU and no problems with performance, inserting and releasing from slot. So with further a due. Can I get some serious estimates, I would appreciate your guys-es help.
Computer Type ACPI x64-based PC
Operating System Microsoft Windows 10 Home
PC CASE: Cooler Master HAF-932
Motherboard
CPU Type QuadCore Intel Core i7-3770K, 3900 MHz (39 x 100) CPU Cooler: Corsair H100 Liquid Cooler
Motherboard Name Asus P8Z77-V LE Plus (2 PCI, 2 PCI-E x1, 3 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)
Motherboard Chipset Intel Panther Point Z77, Intel Ivy Bridge
System Memory 32712 MB (DDR3-1333 DDR3 SDRAM)
DIMM1: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM2: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM3: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM4: Corsair Vengeance CMZ32GX3M4X1600C10 8 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
Monitor Model: ASUS VS247H-P
Disk Drive Seagate Barracuda XT 2 TB ST320006 41AS SCSI Disk Device (2 MB, 7200 RPM, SATA-III)
Optical Drive ASUS BW-12B1ST (12x/2x/8x BD-RE)
SMART Hard Disks Status OK
DMI BIOS Version 0910
DMI Motherboard Manufacturer ASUSTeK COMPUTER INC.
DMI Motherboard Product P8Z77-V LE PLUS
Video Adapter: EVGA GeForce GTX 690, PART NUMBER:04G-P4-2690 with ARCTIC COOLER attached to it.
The only wear and tear that is noticeable is a couple of scratches on the PC case due to cutting out center wires on wire shelf, only leaving frame intact (which the cut ends scratched). With this set up I can slide it around PC on the upper half of case for added support in case PC were to get knocked over. And a broken tab on the 1st PCI 3.0 slot on Motherboard that releases the GPU. I still use this slot for my GPU and no problems with performance, inserting and releasing from slot. So with further a due. Can I get some serious estimates, I would appreciate your guys-es help.
Facebook
Twitter
Instagram