Okay ive had the 212 for about 6 months, when I first bought it I couldn't install it in the mobo, (makes sense, it was almost 7yrs old) and i bought the MSI FXA 990 Motherboard and a AMD FX 8350. And I can't install the hyper 212 evo to save my life, can someone help me install it?
cant install the 212 to save my life
- Thread starter summerock
- Start date
Solution
Lol, fear not! I got ya! 
Okay simply remove the motherboard from the case!
Put it on a table or bed, make sure you got the CPU in it!
Get the cooler and the AMD brackets out! Listed in the manual.
(hard surface may be best..)
put the plate on the back of the motherboard and put the 4 arm metal thing in the center of the hyper 212 Evo cooler adjust the arms by pulling them to the correct width of the screw hole bracket back plate. screw in done.
(lol, don't forget the thermal past I recommend doing this after you practice seating the cooler on the cpu 2 or 3 times..)
Okay simply remove the motherboard from the case!
Put it on a table or bed, make sure you got the CPU in it!
Get the cooler and the AMD brackets out! Listed in the manual.
(hard surface may be best..)
put the plate on the back of the motherboard and put the 4 arm metal thing in the center of the hyper 212 Evo cooler adjust the arms by pulling them to the correct width of the screw hole bracket back plate. screw in done.
(lol, don't forget the thermal past I recommend doing this after you practice seating the cooler on the cpu 2 or 3 times..)
kfarris
Honorable
- Oct 1, 2012
- 210
- 0
- 10,710
Lol, fear not! I got ya!
Okay simply remove the motherboard from the case!
Put it on a table or bed, make sure you got the CPU in it!
Get the cooler and the AMD brackets out! Listed in the manual.
(hard surface may be best..)
put the plate on the back of the motherboard and put the 4 arm metal thing in the center of the hyper 212 Evo cooler adjust the arms by pulling them to the correct width of the screw hole bracket back plate. screw in done.
(lol, don't forget the thermal past I recommend doing this after you practice seating the cooler on the cpu 2 or 3 times..)
Okay simply remove the motherboard from the case!
Put it on a table or bed, make sure you got the CPU in it!
Get the cooler and the AMD brackets out! Listed in the manual.
(hard surface may be best..)
put the plate on the back of the motherboard and put the 4 arm metal thing in the center of the hyper 212 Evo cooler adjust the arms by pulling them to the correct width of the screw hole bracket back plate. screw in done.
(lol, don't forget the thermal past I recommend doing this after you practice seating the cooler on the cpu 2 or 3 times..)
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
Facebook
Twitter
Instagram