Hi there, I have a new build that repeatedly returns error code 'bd' with Dr Debug.
I have been through the boot/post sticky here, lifted CPU/graphics card, etc, and three (!) different sets of ram (listed).
So I'm a little non-plussed right now. I can see that I've maybe made a mistake in that the various ram I've bought is listed as (OC) on the Asus m/board support (link below). As you might imagine I'm a little wary of buying more ram if there's something else I'm missing.
Thanks to anyone who may have some advice.
Hardware is:
Motherboard: ASRock x99 Extreme 6
Processor: INTEL BX80671I76800K CPU/Core i7-6800K 3.40GHz LGA2011-V3
Graphics: MSI GTX 980Ti 6GD5T OC PCI Express Graphics
Ram: 2 of Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200
Corsair CMK16GX4M4A2666C15 Vengeance LPX 16GB (4x4GB) DDR4 2666Mhz
HyperX 32GB DDR4 3000MHz HX430C15PBK4/32
link to supported Ram: http://www.asrock.com/mb/Intel/X99%20Extreme63.1/?cat=Memory
I have been through the boot/post sticky here, lifted CPU/graphics card, etc, and three (!) different sets of ram (listed).
So I'm a little non-plussed right now. I can see that I've maybe made a mistake in that the various ram I've bought is listed as (OC) on the Asus m/board support (link below). As you might imagine I'm a little wary of buying more ram if there's something else I'm missing.
Thanks to anyone who may have some advice.
Hardware is:
Motherboard: ASRock x99 Extreme 6
Processor: INTEL BX80671I76800K CPU/Core i7-6800K 3.40GHz LGA2011-V3
Graphics: MSI GTX 980Ti 6GD5T OC PCI Express Graphics
Ram: 2 of Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200
Corsair CMK16GX4M4A2666C15 Vengeance LPX 16GB (4x4GB) DDR4 2666Mhz
HyperX 32GB DDR4 3000MHz HX430C15PBK4/32
link to supported Ram: http://www.asrock.com/mb/Intel/X99%20Extreme63.1/?cat=Memory