1st build, wont boot. No fans spinning just power led comes on

OneZeroNine

Commendable
Oct 3, 2016
6
0
1,510
Hey there guys so I just did my 1st build today and have ran into problems. It just wont boot at all when I try to turn it on, all I get is a solid white power led come on and fans dont spin either. I have checked over the manual multiple times and made sure everything is connected but still nothing. I've just ordered a mobo speaker that will arrive in a few days, hopefully that will help me find out what is the problem. You guys able to help though for the mean time?

My specs are:

i5 4690k
Cooler Master Evo 212x
Asus Z97-P Motherboard
16gb Ballistix sport
Adata Premier SP550 240GB SSD
1TB WD Blue HDD
650w EVGA Supernova G2 PSU
Corsair 200R case
 
Solution
Try testing the power supply: https://www.youtube.com/watch?v=5FWXgQSokF4
See if a fan connected to it does spin. If it does, make sure that both 24 and 8 pin power cables are connected to the motherboard.
Then try starting the board by shortly touching with a screwdriver the 2 pins on the motherboard corresponding to the case power button.