which ram speeds do i need for overclocking

avinnash09

Commendable
Oct 11, 2016
4
0
1,510
my pc configuration is
amd phenom x4 955 black edition
msi 970 gaming
deepcool assasin cooler.
here i just gave the information which is just useful for my question. i have two options to buy ram now,
1. 2x kingston hyperxfury 8gb 1866 Mhz
2. 2x g-skill ripjaws x 8gb 1600 Mhz
both rams with CL10 timing,
i was a bit confused about overclocking relation with ram timings and frequencies.
which ram shall i buy for best overclocking.
i saw in some forums which said, overclocking cpu increases/overclocks ram while in some places i saw that ram speed decreases on overclocking.
please suggest which ram to buy and what happens when overclocking?
(tried searching answer for this on the forum but could not get)
 
Solution
Either kit will work. Overclocking a black edition Phenom will have no effect on memory speed if you only adjust the cpu multiplier. If you play around with the base clock having a wide range of acceptable frequencies will make overclocking a little easier.

In general DDR3 1866 CL10 is faster than DDR3 1600 CL10, but isn't noticeable in most situations.
Either kit will work. Overclocking a black edition Phenom will have no effect on memory speed if you only adjust the cpu multiplier. If you play around with the base clock having a wide range of acceptable frequencies will make overclocking a little easier.

In general DDR3 1866 CL10 is faster than DDR3 1600 CL10, but isn't noticeable in most situations.
 
Solution

avinnash09

Commendable
Oct 11, 2016
4
0
1,510


thanks for the reply. please tell me, can i overclock the cpu more if i buy the kingston ram instead of the g skill ram?
(i already knew the difference in performance of these ram sticks, but wanted to know the effect of the ram speed on overclocking)
 
The memory will have very little effect on the overclock of the CPU. Some advanced overclockers can take advantage of a wider array of memory speeds to fine-tune higher clocks, but that's not something the average user does, and in the end it nets maybe a 1% difference in final clock speed.