PC keeps restarting and unloading my HDD on BIOS

gdkkn

Commendable
Oct 12, 2016
3
0
1,510
I just got a problem where my pc says "Reboot and Select proper boot device", so i googled a bit and found the solution, and that is to change the priority launch on BIOS, so i tried that but my brother turned the computer off when i tried that and he reinstalls windows on the issuing computer (what a jerk) and that did not work. So i retry my method and it worked, but after the windows finished loading the computer immediately restarts itself and undectecting my hard drive on bios compeletely, i googled again and it looks like i just have to 'reseat' it. Got it working again, but it keeps doing the same thing. Restarting, unloading hard drive from BIOS, i reseat it again, it unloads hard drive from BIOS again. I need your help!!! :D
 
Solution
Welcome to the TH Community, @gdkkn!

I'd strongly recommend you swap the SATA cable and the SATA port where your booting HDD is connected to the motherboard. It might also be a good idea to check how your HDD performs in another PC to make sure it doesn't disconnect there either.

Let me know how it goes! :)
SuperSoph_WD
Welcome to the TH Community, @gdkkn!

I'd strongly recommend you swap the SATA cable and the SATA port where your booting HDD is connected to the motherboard. It might also be a good idea to check how your HDD performs in another PC to make sure it doesn't disconnect there either.

Let me know how it goes! :)
SuperSoph_WD
 
Solution

gdkkn

Commendable
Oct 12, 2016
3
0
1,510

Thank you so much for your help :) it's back to normal again