Hello. I've recently ordered the components for a new PC I wanted to build for myself.
NVIDIA GeForce GTX1060 3 GB GDDR5
Corsair CP-9020097-UK VS550 ATX/EPS Vs Series 80 Plus Power Supply Unit
INTEL Skylake Core i5 6500 3.2Ghz
ASUS H110M-A Motherboard
8GB 2133Mhz DDR4 Crucial RAM
NZXT S340 Razer edition case
+ My old HDD
I put it all together watching step by step guides, after everything was finally done, I booted the device, got into bios to configure boot order, ran the windows installation and a short while later the PC shut down on its own and I wasn't able to get it booted up again. I don't get any signals or anything when I try to turn it on. The only sign of life is a short blink of the green LED light on the bottom of this NZXT case.
I'm very frustrated and demotivated right now, because I can't find/understand the cause of this problem in order to fix it. I hope I can get some advice on what should I do in this type of situation.
NVIDIA GeForce GTX1060 3 GB GDDR5
Corsair CP-9020097-UK VS550 ATX/EPS Vs Series 80 Plus Power Supply Unit
INTEL Skylake Core i5 6500 3.2Ghz
ASUS H110M-A Motherboard
8GB 2133Mhz DDR4 Crucial RAM
NZXT S340 Razer edition case
+ My old HDD
I put it all together watching step by step guides, after everything was finally done, I booted the device, got into bios to configure boot order, ran the windows installation and a short while later the PC shut down on its own and I wasn't able to get it booted up again. I don't get any signals or anything when I try to turn it on. The only sign of life is a short blink of the green LED light on the bottom of this NZXT case.
I'm very frustrated and demotivated right now, because I can't find/understand the cause of this problem in order to fix it. I hope I can get some advice on what should I do in this type of situation.
Facebook
Twitter
Instagram