- Oct 14, 2016
- 1
- 0
- 1,510
Gskills Ripjaws V 2400Mhz
- Thread starter Anil Jariya
- Start date
Solution
- Dec 2, 2009
- 38,904
- 980
- 135,890
Try putting the monitor display cable onto the integrated graphics output port. I am thinking that the bios is set to use that one first.
The setting you will need to change is something like 'graphics to initialize first' and you would set it to pcie, peg, or add-in, depending on the bios being used.
The setting you will need to change is something like 'graphics to initialize first' and you would set it to pcie, peg, or add-in, depending on the bios being used.
Facebook
Twitter
Instagram