PC Wont boot after failed bios flash

Soulsofblack

Commendable
Sep 30, 2016
13
0
1,520
Hello guys, i have my brother's pc with a msi a68hm e33 v2. recently i instaled windows 10 pro 64bit, and used the disk that comes with msi utilities, one of them, the update utility, automaticaly downloaded newest bios version (i used to have the 8.10 and the utility tried to update to 8.40) tried to update it via windows and literally leaved mi pc like a gigantic piece of unuseful technology, pc boots, no image, and i can hear two short beeps, and then nothing happens, pc stays powered on until i manually shut it down. The bios is an AMI BIOS, i readed that msi boards come with a restore utility, but i dont know how to start it. Any thoughts? is my bios bricked? Any help will be apreciated.
 

Soulsofblack

Commendable
Sep 30, 2016
13
0
1,520


tried that, but it didnt worked, i observed that my usb drive was working in the usb ports ( it has a built in state led flashing, that means is writing or reading information) but i leaved it for 5 minutes and nothing happened.
 

gussrtk

Honorable


just looked up your BEEP CODE. 2 beeps points at RAM error. if you have 2 ram sticks, try starting up the system with 1 ram stick at a time to see if that's the issue.