Install the Drivers,then the Operating System as asked by the manufacture

bugmeso

Distinguished
Apr 18, 2010
65
0
18,640
I have a Gigabyte GA-X99-UD3P mobo and already tried to install the Win7 64 bit but end up (each time) it gets to the point where the OS reboots and then goes black screen and reboots over and over with the Gigabyte splash screen. Now when I checked for updated drivers it says on a few of them to "Note: Windows setup to read from USB thumb drive." That's where it stops for me. And since you CAN NOT talk to ANYONE at Gigabyte, this leaves to search and search.Any help would be greatly appreciated or even a link to a video ;)
 

bugmeso

Distinguished
Apr 18, 2010
65
0
18,640
Then I see that is for the USB drivers?? I did not get that screen that they show in the video. Here is what I am referring to:
Intel SATA Preinstall driver
(For AHCI / RAID Mode)
Note: Windows setup to read from USB thumb drive

ALSO THIS:
Intel Management Engine Interface
(Note) Please installing Microsoft Hot fix first, if operation system is
Windows 7


Unless the USB drivers are causing the problem. Then I still have to get the AHCI drivers on before the OS.
 

bugmeso

Distinguished
Apr 18, 2010
65
0
18,640
I can only assume this is what you and everyone else is talking about:
Intel SATA Preinstall driver
(For AHCI / RAID Mode)
Note: Windows setup to read from USB thumb drive

Load this driver when I try this tomorrow....? And I did read at the bottom of the posts, If you want to add more drivers just copy the to the same subdirectory where this driver is