Please guide me for assembling a new home pc.

chandanDas

Commendable
Oct 18, 2016
2
0
1,510
I am assembling a new computer for my home by gigabyte F2A68HM-S1. FM2+ SOCKET. PROCESSOR IS AMD A4 4020 DUAL CORE 3.4 GHZ. 4gb kingston ram. I want to use wndows 7 32 bit. Please guide me for the best bios setup. I have no concept about WEFI and legacy option. Therefore after os installation always my computer going too slow to boot. And sometime it lost devices either hdd or dvd drive. And sometime both devices are not found after rebooting. Then my os showing the option to repair windows. I cant use my pc still now. Bios is already updated from my purchasing time.
 

gussrtk

Honorable
your request is kind of all over the place. but using a 32bit OS is probably one of your biggest drawbacks. 32bit OS are designed for.... if i may... cheap *** laptops which are dualcore with under 4gb ram.

What are you actually requesting? you want to build a new pc or you want to REBUILD yoru pc?
 

chandanDas

Commendable
Oct 18, 2016
2
0
1,510
Two months ago I assembled a desktop pc by uppermentioned configuration with 2 tb hdd. But that pc don't run properly. It is too slow to work. Sometime device missing also (example hdd or dvd writer). I did not faced this type problem last 10 years by using intel or msi branded m board. I had no experience about gigabyte m board. even I agree to use 64 bit os now. But 64bit os also creating same problem. I reinstalled os at least 15 times. Applied windows 7, 8, 8.1, 10 with 32 bit and 64 bit also. But no os could run properly. Sometime pc is getting hang for a long time. I applied anothher hdd 1tb. no result.
My question: Do I need a bios setting befor os installing for this mboard? If yes then guide me. I never set bios manually for my another pcs also in the previous days. just purchased them, installed and started..
Give me a good suggestion.