Trying to plan a setup for internet and VoIP phones on a DIA fiber connection

Patrick_113

Commendable
Oct 20, 2016
3
0
1,510
We have a Cisco 2800 Series Router, 2 Cisco SG200-50FP PoE switches and 2 D-Link DIR-890L WiFi routers. We will have a block of 5 IP addresses from our ISP

The way I am thinking is, I plugged the fiber connection via Ethernet cable into the Cisco router and then connect it to switch 1 and have that switch connected to switch 2. Then I was going to have the D-Link WiFi routers to connect to one of the switches or one on each switch. I am trying to plan this the best way I can. The new location is being wired from the drop/jack in the cubicles and offices for phones all the way to the patch panel in the networking closet. We will be using cloud based VoIP and internet over the fiber. We will also have 2 multi-function printers that will be wired connections. I can also say most will daisy chain their laptops from the phones. That is sort of my back up plan if I can't get the D-Links to work properly because I am concerned about DHCP/NAT due to the setup I am thinking of router>switch>switch>WiFi routers. Please feel free to ask me any questions to better understand what I am trying to accomplish. I sure can use all the technical help and advice I can get on setting this up. Thank you and god bless.
 
Do you intend on having wifi clients on a separate subnet? If not then you want the "wifi routers" in AP mode, not routing. (static IPs on same subnet, disable NAT, firewall and DHCP, gateway = Cisco router (this performs NAT and DHCP). How many users are you planning for?
 

Patrick_113

Commendable
Oct 20, 2016
3
0
1,510


We have around 60 users and the numbers are growing. No we do not have to be on a different subnet. I was wondering about whether to have the Cisco router to be handle assigning IP's or not. Also, with the switches, I am wondering if the switches should be trunking or stacking?

Thank you for your reply

 

Patrick_113

Commendable
Oct 20, 2016
3
0
1,510


I wish I could but I do not have any software like Visio to create a chart or diagram.

You have any suggestions?

Thank you for your reply
 


Personally I say trunked