So I was using my computer to when the whole display went black only showing the curser. Afterseeing this I waited a couple minutes then I held the power button on to turn the machine off. When I turned the computer back on it said the CPU was overheating and I should change the fan settings. After changing the settings to turbo instead of standard the computer shut off. Ever since then it won't display and the led on the motherboard is switched on every time I try to boot it. I also have already tried all the cmos and ram fixes and it's 100% the cpu. Finally I also did use a can of compressed air and cleaned the whole pc including putting new thermal paste on the cpu. When I put new thermal paste on it there seemed to be no visual apparent damage that may of happened from it overheating although I may say it definitely needed more thermal paste.
-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Computer won't display and no beep cpu led light (on)
- Thread starter Edwin_21
- Start date
Solution
hang-the-9
Titan
- Mar 25, 2010
- 60,387
- 1,081
- 152,940
If you are sure it's the CPU, you need to try a known good one, it may also be the motherboard.
Your BIOS settings are on defaults correct? Was the system overclocked?
Your BIOS settings are on defaults correct? Was the system overclocked?
hang-the-9
Titan
- Mar 25, 2010
- 60,387
- 1,081
- 152,940
You can't corrupt a motherboard with a Windows driver so it does not actually turn on unless it's flashing the BIOS. If it does not even show you a display at all, it's not a driver issue or anything Windows did to the system.
If you have an add-on card did you check it on the onboard video also, with the other card removed?
TRENDING THREADS
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 50
-
-
Question Need Help: Sapphire RX 5700 XT Nitro+ Not Working in Main PCIe Slot
- Started by digows
- Replies: 18
-
Question what should i look out for when buying used ryzen chips?- Started by jordanbuilds1
- Replies: 21
-
-
Facebook
Twitter
Instagram