ASRock Z170 Pro4S No post, no display, all fans running

jessesuave · Oct 26, 2016

So I got all these parts today threw them together (I've done tons of builds before this so this isn't new to me) and there's no post, no display, nothing but fans running and the fans that have LEDs the LEDs are on.

Components are as listed here on pc partpicker: http://ca.pcpartpicker.com/list/Y4kH4C

I really would love any help I just cannot figure this out and I am desperate to get this beast built.

I will be bread boarding tomorrow to figure out if my Mobo is dead or not but any suggestions are welcome.

bgunner · Oct 26, 2016

If you do not have one pick one up and install a "case speaker" this little speaker usually connects down near the front panel header. This will give you trouble code beeps to help in the diagnosis of your issue. Not to mention is usable in your next build and the next and so on. Cost $5 USD.

jessesuave · Oct 26, 2016

Yeah I'll probably have to pick one up.

jessesuave · Oct 27, 2016

SOLVED!!!!! ANYONE WITH A 212 EVO with this issue loosen the screws holding it onto the backplate a bit worked for me!

bgunner · Oct 27, 2016

The Issue is not with the cooler but the installer of the cooler tightening it to much. This in itself is a common issue. I have this cooler, it is not the cooler at fault.

Glad you tracked it down because it can take a while to find that issue.

MuffinSeeker · Dec 4, 2016

jessesuave :

Thankyou so much for this. My boyfriend and I built a PC today and we were just about to give up and send it to a repair shop. I knew it would be something simple and stupid!

Search

ASRock Z170 Pro4S No post, no display, all fans running

jessesuave

Reputable

bgunner

bgunner

Judicious

jessesuave

Reputable

jessesuave

Reputable

bgunner

Judicious

MuffinSeeker

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page