Installed New Ram, Now Computer Won't Turn On

Toggle sidebar Toggle sidebar
P

Payton_6

Commendable
Nov 1, 2016
1
0
1,510
I had 2x4 DDR3 - 1600 Hyper X RAM before. I decided to add 2x4 to that so that I could have a total of 16GB of RAM (same type of RAM), but my computer would turn on (fans would operate) without getting to the BIOS. I would remove the 2x4 I added and my computer would work fine. I have since then took out all RAM and now no matter what combination of sticks I use (even the original), the computer will turn on (fans) but not even get to the bios (no visual).
 
Sort by date Sort by votes
DuRoi

DuRoi

Honorable
Feb 5, 2014
31
1
10,560
Try a decent clear cmos, take out battery cmos and unplug your computer from AC for 60 secs.
Try again with first kit (original), if it wont boot try several times on/off till it boot. Should boot in 2 or 3 times.

If you lucky test new kit again (not all 4). One stick at a time to test all possibility if you need to.

If you get the first one to work but the new doesn´t work may be a defective kit.

P.S- Also, if you can´t put it to boot and if you say the computer will turn on fans than your PSU may be came trushed. Like my brother´s comp. last week.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom