Bought Palit Geforce GTX 750 1024MB GDDR5 - no display/signal lost after windows logo

Shao__Najtkg

Commendable
Nov 3, 2016
3
0
1,510
That's basicaly it, it works in safe mode, and the gtx 750 is listed in the hardware list
i tried numerous versions of drivers, clean instals, with ccleaner and DDU, i have updates the bios on my MB

BTW; I have asrock m3a ucc Motherboard, and i've found some threads (i've been panically looking up the solution for 6 hours now until i decided to post here) like this one
that basicaly says that it's the motherboards faulty D:

so wat do, im loosing my isht here ._.
 
Hello... What OS version?
What was your previous working card in your system?

1) in safe/DOS mode delete any Folder in C:\ root directory named AMD or Nvidia... these would have been created as temp directories during a previous install, and still contain files.
 

Shao__Najtkg

Commendable
Nov 3, 2016
3
0
1,510
Im running Windows 7 64bit.

As i stated before i did a clean driver install and i've used Display Driver Uninstall or DDU for short to remove any extra files along side CCleaner but it didn't help.

To make sure it's not the gpu, i took GTX 750 Ti from my friend and i've got the same problem.

Anything i should try before i take it back and replace it with a different card?
 
Well if you had an old card in before, the 750 Ti will give you the same problem as it's a leftover issue from your old card, not a problem with the new one so your friends GPU wouldnt work either. Or do you mean your card failed in his system?

I'd try in a different PCIe slot and maybe try clearing CMOS if the former, just to check if the GPU is ok with the board. Failing that a clean OS install may fix it.

And there was no link to thread about ASRock boards either, but it seems unlikely it wouldnt work.
 

Shao__Najtkg

Commendable
Nov 3, 2016
3
0
1,510
I've tried using older versions of drivers, it didn't work.
I've went to replace the gpu in the store for a different one, i took R7 360
Now i wont' even get the display at bios :|