- Nov 6, 2016
- 4
- 0
- 1,510
Hi People,
I recently change my motherboard and i keep getting bluescreen as I installed 2x4 memory sticks,
here are my build spec :
Proc : Intel Core i7 Haswell 4770
Ram : Corsair Vengeance DDR3 CMZ8GX3M2A 1600C9R 8GB (2x4GB) 9-9-9-24 tested, 1,5v and Team Elite 4GB DDR3 1600 TED34GM1600HV11BK 1,5V 11-11-11-28 tested.
Mobo : Gigabyte GA-z97-HD3 and Gigabyte GA-H97 Gaming 3 (both are LGA1150 with 97Chipset)
at first I was using my old Gigabyte motherboard (i forget the model and series) to GA-Z97-HD3 because a broken PCIe slot (my bad), when i try to install my memory sticks (which are 2 Team Elite (TE) as explained on my build spec above) but then the ram faulty message happened (beep beep sounds and the pc restarting), at first i thought that it was my memory sticks gone bad, not long after that I bought new memory sticks (which are 2x4 Corsair Vengeance) but the problem still occured. then i jump to a conclusion that my mobo also got a faulty.
after a long time of saving (about 1 year), i bought a new mobo which is a H97 Gaming 3, YET THE PROBLEM ABOVE STILL OCCURED, tried every possible position change on the memory slot with both of TE and Vengeance RAM but still my pc can run only with one memory stick
after some hard research and reading i found that i had to change ram frequency and voltage on my bios setting, i looking on thread after thread about the same problem that i had, yet still got no usable setting for me to use 2 ram sticks
in addition, i got my memory sticks tested on my friends PC, none of them are having a problem
can somebody please help me about how to setting my ram on bios? or is there some other solution possibly i haven't tried yet?
thanks before
I recently change my motherboard and i keep getting bluescreen as I installed 2x4 memory sticks,
here are my build spec :
Proc : Intel Core i7 Haswell 4770
Ram : Corsair Vengeance DDR3 CMZ8GX3M2A 1600C9R 8GB (2x4GB) 9-9-9-24 tested, 1,5v and Team Elite 4GB DDR3 1600 TED34GM1600HV11BK 1,5V 11-11-11-28 tested.
Mobo : Gigabyte GA-z97-HD3 and Gigabyte GA-H97 Gaming 3 (both are LGA1150 with 97Chipset)
at first I was using my old Gigabyte motherboard (i forget the model and series) to GA-Z97-HD3 because a broken PCIe slot (my bad), when i try to install my memory sticks (which are 2 Team Elite (TE) as explained on my build spec above) but then the ram faulty message happened (beep beep sounds and the pc restarting), at first i thought that it was my memory sticks gone bad, not long after that I bought new memory sticks (which are 2x4 Corsair Vengeance) but the problem still occured. then i jump to a conclusion that my mobo also got a faulty.
after a long time of saving (about 1 year), i bought a new mobo which is a H97 Gaming 3, YET THE PROBLEM ABOVE STILL OCCURED, tried every possible position change on the memory slot with both of TE and Vengeance RAM but still my pc can run only with one memory stick
after some hard research and reading i found that i had to change ram frequency and voltage on my bios setting, i looking on thread after thread about the same problem that i had, yet still got no usable setting for me to use 2 ram sticks
in addition, i got my memory sticks tested on my friends PC, none of them are having a problem
can somebody please help me about how to setting my ram on bios? or is there some other solution possibly i haven't tried yet?
thanks before
Facebook
Twitter
Instagram