NO BIOS on boot up after black screen of death& blinking Cursor

JMILLER1234

Commendable
Nov 7, 2016
1
0
1,510
Specs
MB GIGABYTE H77-DS3H LGA 1155
Intel i5
16GB Gskill ripjaw DDR3 SDRAM
Gigabyte GeForce GTX960
Plextor m3 series 128 GB internal SD
Windows 10 (upgraded from win7 )
MS ergo media KB

Windows 10 Crashed and could not viewer using any available options
Rebooted and got black screen of death with blinking cursor
today I do not even get the blinking cursor
Cannot Get into the BIOS Or boot setup using DEL or F12

tried going direct to MB with monitor but no luck

suspect my SsD

waiting for new SSD and a basic KB

anything else I should look at as suspect

also any advice on how I can prepare for this in the future?
 
Solution
You should be able to get into the bios without the SSD or GPU installed. I would try with just one stick of ram also.

Have your tried a bios recovery using the dualbios? If the above doesn't work then that is what i would try next.

popatim

Titan
Moderator
You should be able to get into the bios without the SSD or GPU installed. I would try with just one stick of ram also.

Have your tried a bios recovery using the dualbios? If the above doesn't work then that is what i would try next.
 
Solution

TRENDING THREADS