Pc won't post after overclock

Toggle sidebar Toggle sidebar
A

AndrewBrah

Commendable
Nov 11, 2016
2
0
1,510
Pc won't post after overclock. My monitor won't turn on and the fans turn on and the CPU fan spins super fast. My keyboard lights don't turn on. I've tried jumping cmos, switching out ram sticks, taking out the battery for 12 hours and unplugging the psu. My specs are msi z87-g45 mobo
Intel i5-4670k
Corsair 750ti psu
And a huge CPU cooler but I forgot the name
8gb ddr3
I've also tried unplugging the you and using the onboard graphics
 
Solution
Neur0nauT
If you have already tried to reset your CMOS by disconnecting the jumper, it should be at least posting to factory defaults. You might have to remove the CMOS battery to reset the bios.

Follow the guide HERE

Good luck!
Sort by date Sort by votes
Natsukage

Natsukage

Estimable
Oct 28, 2016
1,264
0
2,960
Hello.

Were you monitoring the temperatures as you overclocked? Including the motherboard? Overclocking is always a risk, either to your CPU, RAM or the motherboard.

My bet is that your motherboard is defect. I suggest trying to change it out first. I don't suggest trying another CPU unless you have a spare Pentium or something, which are low cost. The motherboard might break your new CPU as well.
 
Upvote 0 Downvote
A

AndrewBrah

Commendable
Nov 11, 2016
2
0
1,510
Okay sadly I'm going to order a new motherboard since I don't have one on hand. If it helps i think it's the CPU voltage I meant to set it to 1.19 but I might of done 1.9. And my CPU usually runs at 38 degrees
 
Upvote 0 Downvote
Neur0nauT

Neur0nauT

Admirable
Dec 1, 2014
1,526
1
6,460
If you have already tried to reset your CMOS by disconnecting the jumper, it should be at least posting to factory defaults. You might have to remove the CMOS battery to reset the bios.

Follow the guide HERE

Good luck!
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom