Have just built a new system Using gigabyte ga-z170x-gaming 7 upon first start up it turns on and off and shows no error codes - totally blank as if the display does not work. Called reseller who said that the ram was installed incorrectly, but it is not. Checked other posts that suggest to remove one ram stick and put only one in...tried this in slot 4 and one as suggested - no dice. Had the Power sw, +pled, -pled, and HDDLED all plugged into the F panel but wont turn on using the external switch...so unplugged them and used the internal motherboard power button and just loops.
1: Any suggestions what to try next? Using a liquid cooling fan so cannot check speed of fan, PSU is running - fan spinning etc...
2: Please confirm the correct slots in the FPanel for the above plugs as this is the only thing we cannot find in the manual and are not 100% sure of.
Any help would be greatly appreciated!
1: Any suggestions what to try next? Using a liquid cooling fan so cannot check speed of fan, PSU is running - fan spinning etc...
2: Please confirm the correct slots in the FPanel for the above plugs as this is the only thing we cannot find in the manual and are not 100% sure of.
Any help would be greatly appreciated!