- Nov 15, 2016
- 1
- 0
- 1,510
Hey guys
I've been looking for the forum and couldn't find anything useful for my situation, so I decided to ask you.
Here is where I stuck..
I have Gigabyte H97M-D3H mobo, ocz 2x2gb 1333mhz 1.8v 7-7-7-20 dual kit ram, Hytech 300w psu (only the important ones)
Since I checked from the cpu-z my memory frequency was 1066 and I tried to pull it up to 1333. I guess I've succeed it, however I still have doubts. I set the timings to 7-7-7-20, they were 9-9-9-16 before I set. And change the multiplier to get 1333 instead of 1066. I'm wondering if there is something else I can do or did I do something wrong.
Any help will be appreciated.
I've been looking for the forum and couldn't find anything useful for my situation, so I decided to ask you.
Here is where I stuck..
I have Gigabyte H97M-D3H mobo, ocz 2x2gb 1333mhz 1.8v 7-7-7-20 dual kit ram, Hytech 300w psu (only the important ones)
Since I checked from the cpu-z my memory frequency was 1066 and I tried to pull it up to 1333. I guess I've succeed it, however I still have doubts. I set the timings to 7-7-7-20, they were 9-9-9-16 before I set. And change the multiplier to get 1333 instead of 1066. I'm wondering if there is something else I can do or did I do something wrong.
Any help will be appreciated.
Facebook
Twitter
Instagram