Ram Blue screens

vrcic1 · Nov 17, 2016

Hi guys hoping for some inspiritation on this....

Im running a Crosshair 3 formula motherboard with 2 4gb ddr3 team 1600mhz sticks installed, its been giving me blue screens across the board if I atke one stick out the blue screens stop, the board has native 1600 o.c support but not sure if its set up right and maybe I am asking too much of the system to cope? any ideas please

Tradesman1 · Nov 17, 2016

What CPU? Might try raising the DRAM voltage + 0.05

vrcic1 · Nov 17, 2016

cpu is a am3 socket phenomx4 965 3.6gb, i havent changed any bios settings at all nor have i updated any drivers or flashed the bios as im not sure what im doing.

Tradesman1 · Nov 17, 2016

Try the DRAM voltage increase, if no joy try raising the CPU/NB voltage about the same, the 965 was AMDs first CPU that could sort of reliably run 1600 sticks, the extra voltage additions can help stabilize the sticks

vrcic1 · Nov 17, 2016

Should i atttempt the bios upgrade and newer drivers as well?

Tradesman1 · Nov 17, 2016

That's always a good idea, yes

vrcic1 · Nov 17, 2016

Ok so I have flashed the bios to the latest version and installed all drivers so far so good no errors.

had a look at my dram also:

dram V min 1.51050
dram V max 2.80900

with intervals 0.01325 to 1.51050

im guessing intervals are increments? going on what you said in a previous post im aiming for 0.05 increase of the minimum so basically up to 1.55v?

Tradesman1 · Nov 17, 2016

Yep, give it a try

vrcic1 · Nov 18, 2016

Just in the middle of tweaking it and I had a thought about something I wasnt sure on so i referred to my manual, apparantly for dual channel it requires 1 dimm per channel, however I have been putting both dimm's in the same channel, would that cause the instabilities I mentioned?

Tradesman1 · Nov 18, 2016

Shouldn't no

vrcic1 · Nov 19, 2016

So i upped the Dram to 1.55v and the cpu/nb to 0.85 +0.05 on each the system wouldnt boot and forced me to recover the bios settings, so i loaded them back up and set the target dram to 1600 with both dimms in seperate channels, no blue screens but going to wait a bit before saying its solved however the 0.05 increase didnt work.

Search

Ram Blue screens

vrcic1

Commendable

Tradesman1

Legenda in Aeternum

vrcic1

Commendable

Tradesman1

Legenda in Aeternum

vrcic1

Commendable

Tradesman1

Legenda in Aeternum

vrcic1

Commendable

Tradesman1

Legenda in Aeternum

vrcic1

Commendable

Tradesman1

Legenda in Aeternum

vrcic1

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page